Tech Spec Addendums
Every option control and modification for our ECUs has an addendum for the technical specification, which we will send upon request. If your ECU contains a modification or option, please Contact OpenECU Support to request the addendum.
If you are not sure if your ECU contains a modification or option, most likely it does not. You must specifically ask for the mod/option and pay extra for it. However, here is a guide to help you determine if you have an option or modification.
Your ECU has an option or modification if any of the following are true:
Your ECU is something other than an M110, M220, M250, M460, M461, or M670
For example, if you have an M210
You paid extra for a modification
Your ECU part number (on the label) contains “modX”, where X is a number.
This is for older ECUs. Recently the part numbering scheme changed - see the next bullet point.
The last two digits after the 2nd dash are not 01 OR the last three digits after the 3rd dash are not 000
Example, your part number is 01T-068276-0102-001.
The “-0102” shows that you have mod 02 (the last two digits after the 2nd dash show mod level).
The “-001” shows you have option 001 (the last three digits after the 3rd dash show option).