Flash code 118 - failed application checksum

Flash code 118 can be received when power is interrupted to the ECU during reprogramming. It is likely that you will need to use the default CCP settings or FEPS to reprogram the ECU.

Default CCP Settings:

CCP setting	Default value
CRO message identifier	1785
DTO message identifier	1784
Station address	0
CAN bus identifier	CAN 0
CAN bus baud-rate	250kBps or 500kBps*

* Refer to the approprioate ECU technical specification to determine the default CAN baud-rate

See the reprogramming mode section of the user documentation for more details.