Specific configuration for the M460 target ECU.
None (Main library). (See Section 2.3, “Licensed Features”.)
The pcfg_Config_M460 block configures pin A31 to act as an injector output or as a PWM output. If the pin is configured as a PWM output, then the block can also configure the current trip level for pin A31.
If the block is not present in a model, then the platform software configures pin A31 as a PWM output with a current trip level of 5A during model initialisation.
The output type for pin A31, either injector output or PWM output.
The current trip level above which the output will turn itself off, if the output has been configured as PWM (the current trip level has no effect when the output is configured as injector).