5.1.71. Over-current trip reset (pss_OvercurTripReset)
Prev 5.1. OpenECU blockset reference Next

5.1.71. Over-current trip reset (pss_OvercurTripReset)

Provide access to the over-current trip latch reset functionality.

5.1.71.1. Supported targets

M220-000, M220-0AU, M221-000, M250-000, M461-000 and M670-000

5.1.71.2. Required license

None (Main library). (See Section 2.3, “Licensed Features”.)

5.1.71.3. Description

  • Over-current trip latch reset — when the overcur_trip_reset inport transitions from 0 to 1, the block records a request to clear the over-current trip latches. See the technical specification for the target ECU for details regarding the over-current trip latches.

5.1.71.4. Inports

  • overcur_trip_reset

    Change from 0 to 1 to request a reset of the over-current trip latches. The request is buffered by the blockset and actioned when enough time has past since the last over-current trip reset (ensuring time for sufficient ECU heat dissipation).

    Range: 0 or 1

    Value type:Boolean
    Calibratable:No

5.1.71.5. Outports

None.

5.1.71.6. Mask parameters

5.1.71.7. Notes

None.

Prev Up Next
5.1.70. Output control (pss_OutputControl) Home 5.1.72. Over current trip reset and diagnostic enable (pss_OvercurTripReset_DiagnEnable)