Get the build date for the ECU's reprogramming code.
None (Main library). (See Section 2.3, “Licensed Features”.)
Gets the build date for the ECU's reprogramming code. The build date can be used to distinguish between different versions of the reprogramming code.
Only used under simulation and when the parameter Provide simulation inports is ticked. The outport year is set to the value of this inport for simulation purposes.
Range: [1970, 3000]
Only used under simulation and when the parameter Provide simulation inports is ticked. The outport month is set to the value of this inport for simulation purposes.
Range: [1, 12]
Only used under simulation and when the parameter Provide simulation inports is ticked. The outport day is set to the value of this inport for simulation purposes.
Range: [1, 31]
The year the reprogramming code was built. Under simulation, if the Provide simulation inports parameter isn't ticked, the outport is set to the minimum of its range. The signal attached to the outport must be set as ExportedGlobal.
Range: [1970, 3000]
The month of the year the reprogramming code was built. Under simulation, if the Provide simulation inports parameter isn't ticked, the outport is set to the minimum of its range. The signal attached to the outport must be set as ExportedGlobal.
Range: [1, 12]
The day of the month the reprogramming code was built. Under simulation, if the Provide simulation inports parameter isn't ticked, the outport is set to the minimum of its range. The signal attached to the outport must be set as ExportedGlobal.
Range: [1, 31]
