5.1.115. Waveform — configuration, boost voltage (prop_BoostConfig)
Prev 5.1. OpenECU blockset reference Next

5.1.115. Waveform — configuration, boost voltage (prop_BoostConfig)

Specify the boost voltage setpoint for all output waveforms.

5.1.115.1. Supported targets

M670-000

5.1.115.2. Required license

None (Main library). (See Section 2.3, “Licensed Features”.)

5.1.115.3. Description

This block configures the boost voltage for all waveforms. The waveform must be setup using a prop_WaveformConfig block.

5.1.115.4. Inports

None.

5.1.115.5. Outports

None.

5.1.115.6. Mask parameters

  • Boost voltage

    The voltage value to use for the boost supply.

    Range: [40, 65] volts

    Value type:Real
    Calibratable:Yes, offline

5.1.115.7. Notes

None.

Prev Up Next
5.1.114. Watchdog kick (psc_KickWatchdog) Home 5.1.116. Waveform — configuration, phases (prop_WaveformConfig)