6.8.27. Engine synchronisation (pan_EngineSync)
Prev 6.8. Blockset reference Next

6.8.27. Engine synchronisation (pan_EngineSync)

Retrieve the current engine synchronisation mode.

6.8.27.1. Supported targets

M220-000, M221-000, M250-000 and M670-000

6.8.27.2. Required license

None (Main library). (See Section 2.3, “Licensed Features”.)

6.8.27.3. Description

The pan_EngineSync block retrieves the current engine synchronisation mode. The engine synchronisation mode can be changed by the application using the pan_EngineDeclareSync block. A detailed description of the engine synchronisation modes can be found in Section 6.1.9, “Engine synchronisation modes”. For reference, the decoding state values are:

6.8.27.4. Inports

  • sim_sync

    Only used under simulation. Under simulation, the value of this inport is passed through to outport sync.

    Value type:Integer

6.8.27.5. Outports

6.8.27.6. Mask parameters

  • Sample time

    The periodicity of the block execution.

    Range: [0.001, 3600] seconds

    Value type:Real
    Calibratable:No

  • Provide simulation inports?

    Tick to enable inport sim_sync.

    Value type:Boolean
    Calibratable:No

6.8.27.7. Notes

None.

Prev Up Next
6.8.26. Engine speed (pan_EngineSpeed) Home 6.8.28. Engine synchronisation — declare mode (pan_EngineDeclareSync)