= Flash code 118 - failed application checksum =

Flash code 118 can be received when power is interrupted to the ECU during reprogramming. It is likely that you will need to use
the default CCP settings or [[ECU Recovery|FEPS]] to reprogram the ECU.

Default CCP Settings:
||<style="background-color: #E0E0FF;"> CCP setting ||<style="background-color: #E0E0FF;"> Default value  ||
|| CRO message identifier                          || 1785                                               ||
|| DTO message identifier                          || 1784                                               ||
|| Station address                                 || 0                                                  ||
|| CAN bus identifier                              || CAN 0                                              ||
|| CAN bus baud-rate                               || 250kBps or 500kBps*                                ||
~-* Refer to the approprioate ECU technical specification to determine the default CAN baud-rate -~


See the [[doc_user/openecu_user_guide_simulink_chunk/reprogramming_mode.html|reprogramming mode]] section of the user documentation for more details.