Each target contains a set of software components, each identified by three numbers of the form x.y.z. The first number, x, identifies the major version of the software component. The other numbers, y.z identify the minor and sub-minor versions.
Table 5.25. Software component versions (for M110-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 801.9.0 | 36T-068886-ISS-3 |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 500kbps). | 806.9.0 | 36T-068887-ISS-3 | |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 250kbps). | 816.9.0 | 36T-068888-ISS-3 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 806.9.0 | 36T-068889-ISS-3 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 816.9.0 | 36T-068890-ISS-3 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 806.9.0 | 36T-068891-ISS-3 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 816.9.0 | 36T-068892-ISS-3 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 801.9.0 | 36T-068893-ISS-3 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 801.9.0 | 36T-070106-ISS-3 | |
| Platform library, application support to access ECU functionality. | 801.9.0 | 36T-068894-ISS-1 |
Table 5.26. Software component versions (for M220-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 331.9.0 | 36T-068517-ISS-30 |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 500kbps). | 336.9.0 | 36T-068465-ISS-29 | |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 250kbps). | 346.9.0 | 36T-068466-ISS-29 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 336.9.0 | 36T-068564-ISS-11 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 346.9.0 | 36T-068565-ISS-11 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 336.9.0 | 36T-068518-ISS-30 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 346.9.0 | 36T-068519-ISS-30 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 331.9.0 | 36T-068841-ISS-6 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 331.9.0 | 36T-070107-ISS-6 | |
| Platform library, application support to access ECU functionality. | 331.9.0 | 36T-068520-ISS-20 |
Table 5.27. Software component versions (for M220-0AU)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 331.9.0 | 36T-068517-ISS-29 |
| Reprogramming code, handles CCP, J1939 and/or UDS communications (default CCP baud rate, 500kbps). | 336.9.0 | 36T-068465-ISS-28 | |
| Reprogramming code, handles CCP, J1939 and/or UDS communications (default CCP baud rate, 250kbps). | 346.9.0 | 36T-068466-ISS-28 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 336.9.0 | 36T-068564-ISS-10 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 346.9.0 | 36T-068565-ISS-10 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 336.9.0 | 36T-068518-ISS-29 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 346.9.0 | 36T-068519-ISS-29 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 331.9.0 | 36T-068841-ISS-6 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 331.9.0 | 36T-070107-ISS-6 | |
| Platform library, application support to access ECU functionality. | 331.9.0 | 36T-068520-ISS-20 |
Table 5.28. Software component versions (for M221-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 701.9.0 | 36T-068707-ISS-11 |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 500kbps). | 706.9.0 | 36T-068708-ISS-10 | |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 250kbps). | 716.9.0 | 36T-068709-ISS-10 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 706.9.0 | 36T-068710-ISS-11 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 716.9.0 | 36T-068711-ISS-11 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 706.9.0 | 36T-068712-ISS-11 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 716.9.0 | 36T-068713-ISS-11 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 701.9.0 | 36T-068842-ISS-5 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 701.9.0 | 36T-070108-ISS-5 | |
| Platform library, application support to access ECU functionality. | 701.9.0 | 36T-068714-ISS-2 |
Table 5.29. Software component versions (for M250-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 291.9.0 | 36T-068521-ISS-30 |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 500kbps). | 296.9.0 | 36T-068300-ISS-29 | |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 250kbps). | 306.9.0 | 36T-068301-ISS-29 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 296.9.0 | 36T-068566-ISS-11 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 306.9.0 | 36T-068567-ISS-11 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 296.9.0 | 36T-068522-ISS-30 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 306.9.0 | 36T-068523-ISS-30 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 291.9.0 | 36T-068843-ISS-5 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 701.9.0 | 36T-070109-ISS-5 | |
| Platform library, application support to access ECU functionality. | 291.9.0 | 36T-068524-ISS-20 |
Table 5.30. Software component versions (for M460-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 221.9.0 | 36T-068525-ISS-30 |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 500kbps). | 226.9.0 | 36T-068304-ISS-30 | |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 250kbps). | 236.9.0 | 36T-068305-ISS-30 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 226.9.0 | 36T-068568-ISS-11 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 236.9.0 | 36T-068569-ISS-11 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 226.9.0 | 36T-068526-ISS-30 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 236.9.0 | 36T-068527-ISS-30 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 221.9.0 | 36T-068844-ISS-5 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 701.9.0 | 36T-070110-ISS-5 | |
| Platform library, application support to access ECU functionality. | 221.9.0 | 36T-068528-ISS-20 |
Table 5.31. Software component versions (for M461-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5534 | Boot code, selects system mode to enter on reset. | 271.9.0 | 36T-068529-ISS-30 |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 500kbps). | 276.9.0 | 36T-068306-ISS-29 | |
| Reprogramming code, handles CCP and/or UDS communications (default CCP baud rate, 250kbps). | 286.9.0 | 36T-068307-ISS-29 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 276.9.0 | 36T-068570-ISS-11 | |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 286.9.0 | 36T-068571-ISS-11 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 276.9.0 | 36T-068530-ISS-30 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 286.9.0 | 36T-068531-ISS-30 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 271.9.0 | 36T-068845-ISS-5 | |
| ETAC, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 701.9.0 | 36T-070111-ISS-5 | |
| Platform library, application support to access ECU functionality. | 271.9.0 | 36T-068532-ISS-20 |
Table 5.32. Software component versions (for M670-000)
| Processor | Component | Version | Part-number |
|---|---|---|---|
| Primary, MPC5674F | Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 500kbps). | 506.9.0 | 36T-068815-ISS-9 |
| Combined firmware code, Combined boot and reprogramming code (default CCP baud rate, 250kbps). | 511.9.0 | 36T-068816-ISS-9 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 500kbps). | 506.9.0 | 36T-068817-ISS-9 | |
| Firmware upgrade, application to reprogram boot code and reprogramming code (default CCP baud rate, 250kbps). | 511.9.0 | 36T-068818-ISS-9 | |
| ETAC for primary processor, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 500kbps). | 501.9.0 | 36T-068835-ISS-8 | |
| ETAC for primary processor, hardware embedded test application code to support parametric, function and design validation testing (CAN baud rate, 250kbps). | 701.9.0 | 36T-070112-ISS-8 | |
| ETAC for secondary processor, hardware embedded test application code to support parametric, function and design validation testing. | 501.9.0 | 36T-068877-ISS-6 | |
| ETAC for secondary processor, hardware embedded test application code to support parametric, function and design validation testing. | 501.9.0 | 36T-068836-ISS-6 | |
| Platform library, application support to access ECU functionality. | 501.9.0 | 36T-068819-ISS-20 |
When providing technical support, Pi may need to know the version numbers for the software components.
Details on how to find out the version numbers for Main processor are given in Section 5.2, “Automatic ASAP2 entries”.
Version numbers for HCS12 processor can be retrieved by uploading the software, with FEPS signal applied. Contact technical support for more details.