=== Setting up the MATLAB Path ===

Use the following procedure to reset the MATLAB path and add the OpenECU blockset:
 1. (optional) Restore the default MATLAB path by entering ''restoredefaultpath'' in the MATLAB command line.  This step can normally be skipped, unless your MATLAB path got really messed up.
 1. Change the MATLAB working directory to the OpenECU directory, usually something like this ''C:\openecu\platform\2_2_0_r2013-2_x86-32\openecu''
 1. Run ''oe_switch_version''.  This will bring up at dialog window listing all the installed versions of Open ECU (see picture below).
 1. Select the OpenECU version you wish to work with.
 1. Change the MATLAB working directory to the folder which contains the Simulink model you want to work with.

'''Example commands at Matlab prompt'''
{{{
>> restoredefaultpath                                      % optional - restore MATLAB default path
>> cd('C:\openecu\platform\2_2_0_r2013-2_x86-32\openecu')  % change to the OpenECU directory
>> oe_switch_version                                       % run script to set up the path for OpenECU
>> path                                                    % verify the path was updated

		MATLABPATH

	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\rtw\c\openecu_ert\code_templates
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\rtw\c\openecu_ert
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\rtw\c\openecu_grt
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\rtw\c\openecu_grt_rsim
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\mex_r2008
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\mfile
	c:\openecu\platform\2_2_0_r2013-2_x86-32\openecu\model
        ...
}}}

'''OpenECU Switch Version'''
 {{attachment:SwitchOeVersion.png}}