== My calibration map / table is not working ==

By far, the most common reason for this issue is that the variable names do not follow
the required naming convention.

Map / Table calibration variables must adhere to the following naming convention:
 * The 4th character '''must''' be 'm'
 * All variables associated with the table must have the same name, except for the last two characters
 * The last two characters of the variable name must be '_x' for the input x-axis, '_y' for the input y-axis (2-D maps only),
and '_z' for the output axis.

==== Example: 1-D map ====

Assume you are trying to map voltage to temperature using a 1-D table.  Your x-axis (input axis) will be in units of volts,
while your z-axis (output axis) will be in units of degrees C.  Then your map variables could be as follows:

 * x-axis (1-D vector): INPm_volts2degc_x
 * z-axis (1-D vector): INPm_volts2degc_z

==== Example: 2-D map ====

Assume you are trying to create a spark advance map using mass airflow and RPM as your inputs.  Your x-axis (input axis) will be
in units of grams of air, your y-axis (input axis) will be in units of RPM, and your z-axis (output axis) will be in units of
degrees before TDC.  Then your map variables could be as follows:

 * x-axis (1-D vector): SPKm_sparkMap_x
 * y-axis (1-D vector): SPKm_sparkMap_y
 * z-axis (2-D matrix): SPKm_sparkMap_z

----

[[OpenECU Support Contact|This did not solve my problem]]